Recent Advances of Sustainable Composites in Manufacturing Sector

Authors

  • Manoj Kumar Singh Natural Composites Research Group Lab, Department of Materials and Production Engineering, The Sirindhorn International Thai German Graduate School of Engineering (TGGS), King Mongkut’s University of Technology North Bangkok, 10800 Bangkok, Thailand
  • Suchart Siengchin King Mongkut’s University of Technology North Bangkok, 10800 Bangkok, Thailand
  • Sanjay Mavinkere Rangappa Natural Composites Research Group Lab, Department of Materials and Production Engineering, The Sirindhorn International Thai German Graduate School of Engineering (TGGS), King Mongkut’s University of Technology North Bangkok, 10800 Bangkok, Thailand

DOI:

https://doi.org/10.61779/jasetm.v1i2.1

References

Phiri R, Mavinkere Rangappa S, Siengchin S, Oladijo OP, Dhakal HN. Development of sustainable biopolymer-based composites for lightweight applications from agricultural waste biomass: A review. Adv Ind Eng Polym Res 2023;6:436–50. https://doi.org/10.1016/j.aiepr.2023.04.004.

Spiridon I, Darie RN, Kangas H. Influence of fiber modifications on PLA/fiber composites. Behavior to accelerated weathering. Compos Part B Eng 2016;92:19–27. https://doi.org/10.1016/j.compositesb.2016.02.032.

Sanjay MR, Siengchin S. Editorial corner – a personal view exploring the applicability of natural fibers for the development of biocomposites. Express Polym Lett 2021; 15:193. https://doi.org/10.3144/expresspolymlett.2021.17.

Roux M, Eguémann N, Dransfeld C, Thiébaud F, Perreux D. Thermoplastic carbon fibre-reinforced polymer recycling with electrodynamical fragmentation. J Thermoplast Compos Mater 2017; 30:381–403. https://doi.org/10.1177/0892705715599431.

Monteiro SN, Terrones LAHH, D’Almeida JRMM. Mechanical performance of coir fiber/polyester composites. Polym Test 2008; 27:591–5. https://doi.org/10.1016/j.polymertesting.2008.03.003.

Singh MK, Mohanty AK, Misra M. Upcycling of waste polyolefins in natural fiber and sustainable filler-based biocomposites: A study on recent developments and future perspectives. Compos Part B Eng 2023: 110852. https://doi.org/10.1016/j.compositesb.2023.110852.

Azwa ZN, Yousif BF, Manalo AC, Karunasena W. A review on the degradability of polymeric composites based on natural fibres. Mater Des 2013; 47:424–42. https://doi.org/10.1016/j.matdes.2012.11.025.

Dong C. Review of natural fibre-reinforced hybrid composites. J Reinf Plast Compos 2017; 37:331–48.

https://doi.org/10.1177/0731684417745368.

Ávila AF, Jabbur FG. Sheet forming studies using low-cost composites. J Thermoplast Compos Mater 2005; 18:5–22.

https://doi.org/10.1177/0892705705041158.

Mohanty AK, Wu F, Mincheva R, Hakkarainen M, Raquez J-M, Mielewski DF, et al. Sustainable Polymers. J Am Chem Soc 2022; 144:5197. https://doi.org/10.1021/jacs.1c12548.

Vinod A, Sanjay MR, Siengchin S, Parameswaranpillai J. Renewable and Sustainable Biobased Materials : An Assessment on Biofibers , Biofilms , Biopolymers and Biocomposites. J Clean Prod 2020; 258:120978. https://doi.org/10.1016/j.jclepro.2020.120978.

On the radar: Composite materials producer ramps up sustainability vision | Composites World n.d.

https://www.compositesworld.com/news/on-the-radar-composite-materials-producer-ramps-up-sustainability-vision

(accessed November 20, 2023).

Downloads

Published

22-11-2023

How to Cite

Singh, M. K., Siengchin, S., & Rangappa, S. M. (2023). Recent Advances of Sustainable Composites in Manufacturing Sector. Journal of Applied Science, Engineering, Technology and Management, 1(02), 01–02. https://doi.org/10.61779/jasetm.v1i2.1

Issue

Vol. 1 No. 02 (2023): Journal of Applied Science, Engineering, Technology and Management

Section

Editorial

License

Copyright (c) 2023 Manoj Kumar Singh, Suchart Siengchin, Sanjay Mavinkere Rangappa

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after the acceptance, with an acknowledgement of its initial publication in this journal, as it can lead to productive exchanges, as well as earlier and greater citation of published work.